Category
Ram Mounts
RAM Double Socket Arm with Dual Extension and Ball Adapter - B-Size
C$67.99
Extend your RAM Mount even further with the RAM Double Socket Arm with Dual Extension and Ball Adapter for unlimited viewing angles and maximum articulation.
The RAM-B-201-201U-C consists of a standard-length double socket arm, long-length double socke
RAM MOUNTS Black Large X-Grip With Twist Lock Suction Cup Base Rugged Vehicle Mount
C$89.99
RAM X-Grip Vehicle Mount for large phones/phablets features a suction twist locking base as well as double socket arm and universal spring-loaded X-Grip® cradle.
The 3.3-inch diameter suction cup, twist lock base is designed to have a strong hold
RAM Backing Plate Adapter - 4-Hole AMPS
C$10.99
The RAM Mount 3”x3” backing plate adapter gives users a sturdy plate for mounting AMPS 4-hole pattern ball to a surface. AMPS 4-hole pattern hardware included, 3” x 3” steel backer plate with 10-24 threaded holes.
RAM Pin-Lock Security Knob for C Size Socket Arms
C$14.99
The RAP-S-KNOB5U consists of a 5/16"-18 female threaded security knob and key knob. The RAP-S-KNOB5U replaces all knobs on 1.5" diameter C size arms and mounts. The RAP-S-KNOB5U offers the ideal amount of leverage to properly tighten your mount to prevent
RAM Level Cup XL 32oz Drink Holder with Ball B-Size
C$54.99
Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup™ XL keeps your drink upright, regardless of the conditions. This kit includes the RAM® Level Cup™ XL with a 1" B size rubber ball directly atta
RAM Universal Marine Electronic Ball C-Size
C$26.86
The RAM-111BU consists of a C size 1.5" rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes that will match many electronic devices and mounts, including marine GPS, C
RAM Round Plate with Ball C Size
C$19.99
The RAM-202U consists of a 1.5" C size rubber ball connected to a 2.5" diameter round plate. This mounting component includes pre-drilled holes using the universal AMPS hole pattern.
RAM ROD Fishing Rod Holder with Bulkhead Mounting Base
C$31.24
The RAM-114-BU, high strength composite fishing rod holder with bulkhead base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for t
RAM ROD Fishing Rod Holder with Ball C-Size
C$33.74
The RAM-117BU consists of the RAM ROD® 2000 fishing rod holder and patented 1.5" diameter rubber ball. With the combination of the patented RAM rubber ball and socket system you can rotate the rod holder 360 degrees, while tilting the cradle forward and b
RAM Level Cup 16oz Drink Holder with RAM Tough-Claw Mount
C$44.99
The compact design of the RAM Level Cup 16oz Drink Holder with RAM Tough-Claw Mount allows easy installation in a wide variety of applications including motorcycles, kayaks and boats, bicycles and more.
The RAM-B-132-400U consists of the small Tough-Cl
RAM Double Ball Mount with Two Round Plates - C Size - Medium Arm
C$69.99
This RAM Mount Medium Length C size double socket locking arm come with two 2.5” round ball bases with Universal AMPS hole pattern for maximum versatility and mounting ability for max viewing angles.
The RAM-101U consists of a medium length
RAM Double Socket Arm B Ball C Length
C$29.99
Extend your devices reach and customize it with the long 6” length RAM Mount Double Socket Arm to attach any B Size RAM ball component. Made of powder-coated, marine-grade aluminum.
The RAM-B-201U-C consists of a long double socket arm that accommodate
RAM MOUNTS Plastic Double Socket Arm B Ball A Length
C$14.99
The RAM RAP-B-201U-A Plastic Double Socket Arm attaches to any 1” B size RAM ball component and features a low-profile design. Double ball holder and socket technology allow for near-infinite adjustability for RAM mounting systems.
The RAP-B-201U-A con
RAM MOUNTS X-Grip Universal Phone Mount W/ Snap-Link Toughclaw
C$94.99
The RAM® X-Grip® Phone Mount with RAM® Snap-Link™ Tough-Claw™ is designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.5" in outer diameter.
The RAM Mounts RAM-HOL-UN7-400U consists of the small Tough-Claw™ b
RAM MOUNTS Ball Adapter with AMPS Plate - B-Size
C$14.99
The RAM-B-347U base consists of a B size 1" diameter rubber ball connected to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, using the universal AMPS hole pattern.
RAM MOUNTS Double Socket Arm B Ball A Length
C$24.99
Extend your devices reach and customize it with the short 2.42” RAM Mount Double Socket Arm to attach any B Size RAM ball component. Made of powder-coated, marine-grade aluminum.
The RAM-B-201U-A consists of a short double socket arm that accommodates
RAM MOUNTS Double Socket Arm B Ball B Length
C$24.99
Extend your devices reach and customize it with the medium 3.73” length RAM Mount Double Socket Arm to attach any B Size RAM ball component. Made of powder-coated, marine-grade aluminum.
The RAM-B-201U consists of a medium length double socket arm that
RAM MOUNTS Handlebar U-Bolt Base for Rails 0.5" to 1.25" in Diameter - C Size
C$29.99
Installing a RAM Mount on your motorcycle starts with the RAM® Handlebar U-Bolt Base for Rails 0.5" to 1.25" in Diameter.
The RAM motorcycle handlebar base contains a 1.5" rubber ball designed to sit at right angles to the mounting rail. The zinc
RAM Composite Double Socket Arm - C Size - Medium Arm
C$24.99
The easy to adjust knob and medium double socket arm on the RAM® Composite Double Socket Arm allows for near-infinite adjustability for your connected device.
The RAP-201U consists of a medium double socket arm that accommodates 1.5" C size ball bases,
RAM MOUNTS Double Ball Adapter - C Size
C$29.99
Connect two RAM double socket arms together for extended reach using the RAM Double Ball Adapter.
The RAM double socket connector allows you to connect two socket arms together and maintain a flexible mount. The perfect adapter for connecting two C siz
RAM Double Socket Arm - C Size
C$34.99
The RAM-201U consists of a medium length double socket arm that accommodates 1.5" C size ball bases, device holders, and adapters.
The RAM-201U consists of a medium length double socket arm that accommodates 1.5" C size ball bases, device holders, and
Ram Black Large X-Grip With Drill Down Base Rugged Vehicle Mount
C$79.99
The RAM X-Grip with Drill-Down Base is a rugged vehicle mount that offers a ‘no-bulk’ design with great holding power. Ideal for motorcycle, or in-vehicle solutions.
The spring-loaded X-Grip® cradle expands and contracts, allowing for a perfect custom
